Alta Paints Featured Product: MAPEI Self-Leveling Floors

Primer L -  Advanced-Technology Acrylic Latex Primer for Concrete
Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials.  Use Primer L on a properly prepared and profiled concrete surface at 3:1 ratio ( 2 or more coats may be required).   

Primer E - High-Performance, Low Viscosity 100% Solids Epoxy Primer
Primer E is the most effective method for bonding to nonporous substrates before installing self-leveling underlayments or toppings subject to high stress.  Primer E is highly recommended for all installations of decorative toppings (such as Ultraplan M20 Plus and Ultratop), which demand the highest degree of crack resistance and surface finish.

Planiseal EMB    Premium Epoxy Moisture Barrier for Concrete Substrates
Use as a moisture barrier for concrete subfloors with MVERs up to 20 lbs. per sq. ft. per 24 hours or up to 95% relative humidity.  Primer E is then used as recommended for MAPEI self-leveling products.

Novoplan Easy - Easy preparation, self-leveling underlayment
Novoplan Easy is and economical self-leveling underlayment.  Novoplan Easy is not a wearing surface and must have surface coating (Tile, Natural Stone, Carpet, Vinyl, and Engineered Wood Planking).  1/8” to 1” lifts.
               
Ultraplan M20 Plus - Quick-Setting, Self-Leveling Concrete Topping and Underlayment.
Ultraplan M20 Plus is a self-leveling, self-drying topping, based on High-Hydrated Cement Technology (HCT™).  It is specially formulated for the resurfacing and restoration of interior horizontal surfaces.  Can apply stain or coating in 24 hours.  Prime with Primer E as recommended.  Can be applied in 1/8” to 2” lifts. 

Ultratop - High-Performance, Quick-Setting, Self-Leveling Concrete Topping
Ultratop is a self-leveling, self-drying topping, based on High-Hydrated Cement Technology (HCT™), that is specially formulated for fast-track resurfacing and construction of interior horizontal wear surfaces.  Can be stained or Polished in 24 hours.  Prime with Primer E as recommended.  Can be applied in ¼” to 2” lifts.

Data sheets are available through Alta Paints and Coat and/or www.mapei.com

Welcome to the Alta Paints Blog

We are a distributor of industrial coatings, spray equipment and blast equipment. Our store is geared toward the contractor. We specialize in floor and deck coatings, providing both protective and decorative finishes.

We carry a complete line of epoxy, urethane, stains, sealants, repair products, and sundries. We also carry tank linings, chemical resistant containment coatings, and industrial coatings. Our Equipment Division carries spray and blast equipment, repair parts, and abrasives for blasting. We also sell and install spray booths, repair many brands of equipment, and rent spray and blast equipment.

We have been proudly serving our customers since 1980 John Leyland, our owner, has worked in the paint, coatings, and equipment industry since 1960. He is one of the most knowledgeable and experienced people in the industry. Tod Leyland has over 20 years of experience in the coatings industry. He has extensive knowledge of spray and blast equipment, and runs our abrasive/equipment department. Jennifer Leyland is our coatings expert and has been with our company for over 10 years. John and Jennifer run our coatings department.

We have experienced record growth in the last 5 years and have added several new people to our team. Marc Metcalf is our outside salesperson in charge of equipment and spray booths. He brings over 20 years of experience, including many years with ITW Binks/DeVilbiss. Bryan Howell is now a part of our coatings sales department he has over 15 years of experience in application of industrial and specialty coatings. We are proud of our growth and are committed to continuing this trend. We thank our customers, vendors, and employees for helping us to evolve and strengthen our business.